Edmonton Real Estate Blog

Seating for a kitchen island is a popular design feature that lets your counter space do double duty. While an overhang on the back of the island supported by cabinets is the most common arrangement, it doesn’t afford the best legroom. Who hasn’t banged their knees while scooting onto a kitchen island stool? Islands designed with an integrated dining table at one end fare a little better, but you still must have the right table base for maximum leg comfort. Here’s what to consider.

This simple metal base adds another modern element to the room. The open design, with a base that’s set back from the sides and ends, creates a lot of legroom and is visually lightweight to match the thin profile of the countertop. Another diner could probably be placed on the end.

Allow 24 inches for each chair width and a minimum table width of 30 inches for comfortable seating.

Here’s another base that’s set back from the end and the sides. This arrangement provides legroom for diners sitting across from each other, as well as for a diner or two on the end. The slab design of the base here matches the heft of the countertop better than an open, lightweight design would have.

A square kitchen with a symmetrical contemporary look demands the same in an island. Here that island was designed as a table, without any cabinets. The heavy corner legs give the island visual weight and definition, but they also mean diners won’t bump knees. This dining island is probably at least 60 inches per side, an arrangement that allows two diners per side.

Look closely and you can see that this wood countertop is supported by a mirrored base. The size and construction of any base depends on the size and weight of the countertop. Mirroring a base makes it virtually disappear.

This traditional kitchen has a round, bar-height dining table with a furniture-style pedestal base. You can find a pedestal base in any style. A pedestal allows diners to easily gather around the table without bumping into the base or one another.

The base of this dining table matches the cabinetry, but the prow shape makes it lighter than a boxy cabinet would have looked. Because the base follows the curve of the countertop, knee space is retained for each diner, making the entire length of the countertop usable. This is also a good way to visually lighten the size of a big table area.

When you are planning your kitchen, remember that a very heavy surface material, such as the marble shown here, will require heavy support underneath. Be sure to calculate the width of the base into the total width of the tabletop. Too wide? Reconsider the material and the base design.

A waterfall design creates a beautiful and simple support for the top here. Make sure you have as much length as you need for chairs on each side with something like this, since the flush end is not usable for seating.

The beautiful custom wood base of this island serves as a sculptural element as well as a functional support. The slender V-shape base provides good countertop support but also allows for plentiful knee space.

When is a table base not a table base? When the piece is cantilevered. This dining area can welcome a big crew, as well as Fido comfortably sprawled under the table.

Source: Houzz.com

I’ll admit it: I have an expensive juicer that’s still in its box in my kitchen cabinet. It’s been there for months and cost close to $400. (We paid for it using wedding gift cards.) It’s our fourth one. But that’s because the other three (all the same model) failed within days. By the time we got a different brand and model, my wife and I had lost interest in the constant upkeep and chopping of an entire garden and orchard to get only one glass of juice for each of us.

Of course, I’ve suggested we return the juicer in exchange for something (or many somethings) that we’ll actually use, but my wife refuses to hear it. She plans to use it next week. She promises.

In the same cabinet, we have a large Crock Pot that we never use, another juicer we bought at a garage sale (never use) and some electric chopper thing, also still in its box. If only I had thought about my actual cooking habits rather than give in to a fantasy about what my life might be like if only I had the right gadget, I would have saved a lot of space and money.

In a recent Houzz discussion about the worst home gadget, users pretty much echoed my dilemma. Popcorn makers, ice cream makers, waffle makers, rice makers (think before buying something with the word “maker” in it, by the way) — they all get used once and end up collecting dust in a cabinet.

So I decided to put together some questions we can all ask ourselves the next time we have the impulse to buy yet another bulky, complex, promises-to-make-my-life-easier home gadget. You might find that a good sharp knife and rearranging your busy schedule to allow just a little more prep time in the kitchen are all you need.

Can you use your hands? Cooking is a hands-on process, and that’s the way it should be. For most of us, it’s relaxing and therapeutic. There’s a subtle joy in chopping vegetables, measuring ingredients and working with your hands and simple tools. Once you take that out of the equation and surrender that control to a hulking, electric, ear-splitting gadget, you’ve relinquished the soul that goes into making good food.

And face it: You’re not ever likely to cook a meal for a hundred on a Friday night. That means you probably won’t get much use out of large appliances and gadgets meant to do a simple task at a high volume.

Do you have space? If you’ve got the space — and money and need — to store every new gadget on the market, then by all means, have at it. But the majority of homeowners are very tight on space in the kitchen.

So before you buy, survey your cabinet space and take measurements. Where will the gadget or appliance go? If you have space only up high, how will you reach it? Will you need a step stool or ladder? And how heavy is the appliance? Do you have dishwasher space to accommodate the parts? A large enough sink to wash the machine in? The disruption this new gadget will cause in your life might just outweigh the perceived benefits.

Do you have time? A big complaint with appliances is that they take a long time to clean. Most of them can’t go in the dishwasher, and even if some parts do, it takes time to disassemble the appliance, wipe it down and reassemble it.

Also, have you ever made your own pasta? It takes a long time. So maybe a pasta maker is not something you need on a regular basis.

What can you use it for? Avoid appliances or gadgets that offer to do one simple task just a little bit better: a garlic peeler, a lemon zester etc. Most of the time, you’ll find that a good kitchen knife will do the trick; plus it’s easier to clean and more empowering.

Also avoid gadgets that promise to do too many things. A multiuse gadget will likely do 10 tasks poorly, while 10 solid hand tools will perform great.

What will you use it for? If you made a pureed soup one time last year and thought maybe a handheld blender would make your life easier, maybe you should reconsider. Having a gadget that you take out only once or twice a year isn’t very efficient. Similarly, you probably don’t need a stand mixer if you bake only every so often.

Spend the money elsewhere. I can’t express strongly enough how important and useful a good set of kitchen knives is. One sharp knife can do the work of all those Slap Chops and multipart dicers. Plus, there will be less to clean up. And nothing beats a sturdy, handheld can opener.

Sleep on it. Never give in to a late-night infomercial or cooking demonstration on the spot. With any investment — no matter what the cost — give yourself time to really think about how important the gadget will be to you. Ask yourself the aforementioned questions first.

User 574steele has a great tip: “Before purchasing a gadget, check out the local thrift shops. If they have a zillion electric yogurt makers, they probably aren’t worth buying.”

And please, don’t give people gimmicky gadgets as gifts. If you don’t use one, chances are they won’t either.

Source: Houzz.com

Electricity in the home is so commonplace that it’s easy to forget how dangerous it can be. According to the American Institute for Preventive Medicine, an electrical shock can knock you unconscious, cause a serious burn, or even stop your heartbeat.

Fortunately, there are some simple things you can do to reduce the risk.

• Install safety plugs in outlets that young children can reach.

• Never plug in anything with a frayed or otherwise damaged power cord.

• Never use a plugged-in computer, hair dryer, or other electrically-powered item near a filled sink or bathtub. This includes phones with power cords.

• Never touch anything electrical with wet hands or while standing in water. (Water is a remarkably efficient conductor of electricity.)

• Always turn off the appropriate breaker before doing any electrical work, such as installing a new light fixture.

• When replacing a broken light bulb, turn off the breaker first. Although the glass is broken, the filament may still be conducting electricity.

Finally, unless you’re an expert or an electrician, never do any major electrical work on your own. Hire a professional.

Unless you’re a real estate expert, you probably look at the market and think things are pretty confusing. Even a bit crazy! You hear news about “bubbles bursting”, “higher or lower home sales in a particular month”, “new home starts” that are up or down, and on and on it goes.

It’s a lot of news and a lot of jargon.

If you’re thinking of selling your home within the next year or two, you will want to understand what’s happening in the market so you can make the right decisions and get a clear sense of what to expect. So, how do you make sense of it all?

That’s where a good REALTOR® can help.

Even if you don’t have any definite plans to move in the near future, a REALTOR® who is an expert in the local marketplace can help you understand what homes in a particular neighbourhood are selling for, and what you can expect to get should you decide to list your property.

Getting to know a REALTOR® also means you’ll have a trusted expert to talk to from time to time, when you have real estate-related questions.

You’ll have someone you can think of as “Your REALTOR®”.

Plus, when the time comes to sell your property, you won’t have to deal with a stranger. Instead, you’ll be able to work with a REALTOR® that you know well — and who knows YOU. Overall, that will make the buying and selling process go more smoothly and more successfully.

Looking for a good REALTOR® who wants to get to know you? Call today!

OK, so you have a perfectly good kitchen. The layout works; the cabinetry is solid; but it just needs a little uplift. There are plenty of relatively minor changes you can make that don’t involve restructuring your life and house. Here are a few.

1. Repaint your cabinets. A fresh coat of paint can transform a kitchen from dark and dingy to light and airy. If you are a few years away from that big kitchen reno, this is a great time to have some fun with color.

2. Upgrade your countertop. Upgrading a dated countertop will give new life to your entire kitchen and add value.

3. Install a new backsplash. If your cabinetry and countertop work nicely but your room lacks pizzazz, a new backsplash can add lots of personality and really dress up a kitchen. A bit of texture, sparkle or gloss will give simple cabinetry a lot of presence.

4. Make a statement. New jewelry always picks up my mood. It can do wonders for your kitchen too. New hardware can dress up plain cabinets, while standout lighting fixtures can add a surprising wow factor.

5. Change your faucet. A detachable hose with a hand spray comes in handy for so much more than just giving a bath to the cat. I prefer a faucet with a flexible braided water-supply hose. It looks better than a plain black rubber hose and will last longer.

6. Expand your horizons. Need more surface area? Don’t think you need to start from scratch. If you have an island, you can introduce a different material on an added eating counter either below or above the counter.

The standard counter height is 36 inches. A nice option, like you see here, is to add an extension at table height (30 inches is typical). The great thing about adding a table-height extension is that regular kitchen and dining chairs will pull up to the counter comfortably. If you prefer a higher surface, you could go with bar height (40 to 42 inches).

7. Consider refacing. New cabinet fronts and doors can dress up the cabinetry boxes if the layout already works and they are solid.

8. Rethink the uppers. Open shelving offers an opportunity to display collections or just keep frequently used items accessible. Wine comes to mind, but that’s just me.

9. Add some cozy touches. A runner is a great addition to a galley kitchen. I don’t know why we are disciplined to treat our kitchen like it has a different set of rules when it comes to decor. I’m all for adding a table lamp for an unexpected element in a kitchen.

10. Add a floating island. If a new bank of cabinetry is beyond the budget, try a ready-made freestanding piece to add extra storage and a surface for working and eating surface.

Add a new top to a freestanding piece of furniture and extend the edge for an eating counter. The minimum overhang would be 10 to 12 inches, but there are a few considerations when extending the top. Take care not to shift the balance of weight so much that the piece is unstable (people love to rest their elbows, adding weight to the surface). Also you may need to add brackets to support the overhang.

11. Add a showstopper. A simple kitchen with simple cabinetry is downplayed by a showpiece range. Playing up one feature is a great way to detract from less interesting elements.

Source: Houzz.com

To View & Search All MLS Listed Houses for Sale Visit Us At:
www.EdmontonHomesforSale.biz

Team Leading Edge
RE/MAX ELITE
Direct: 780-634-8151
Office: 780-406-4000

Weathering the cold and dark winter months is a challenge for anyone, but can be especially difficult if you live in an older home. Older homes carry a lot of appeal but older homes also come with problems and a lot of them are brought to light in cold winters. These are common issues that should be addressed and corrected so that your focus is on friends, family and holidays, and not with home repairs.

	Many older homes come with beautiful glasswork but unfortunately, these drafty, single-pane windows allow heat to escape, wasting energy and money. Replacement windows can be expensive but they are often the most effective way to increase energy efficiency and comfort.
	Insulation overall can be a problem in older homes, and inadequate insulation should be supplemented with additional insulation, particularly in attics. In order to ascertain how much insulation you need, check with local sources to determine if minimum insulation ratings (R-values) are required in your area for new homes and then meet or exceed those levels in your older home if you can.
	Outdated water pipes can cause huge problems if cold temperatures cause them to freeze or burst. Older pipes made of galvanized steel, iron, or lead may need to be replaced if they are not in good condition. Good replacement options include copper or CPVC.

Early sunsets can make the winter seem dreary and long, so simple steps to brighten the interior of your home can go a long way to lifting those winter blues. Add bright color to any room with pillow covers, flowers, or indoor plants. Likewise, giving a small space like a powder or laundry room a fresh coat of paint in a cheerful color can help brighten an indoor space without becoming a major project. If you’ve got a green thumb, you can also take this time to plan out your spring garden, reminding yourself of sunnier, longer days to come.

Source: Pillar To Post Home Inspectors Newsletter

History has shown that economic recoveries following recessions are typically both strong and durable. As shown in the chart, once the recovery takes hold and the economy does start expanding, it is rarely for a short time. In fact, periods of expansion that came on the heels of downturns averaged 57 months or close to 5 years. After 1960, the average period of expansion following a recession was even longer at 71 months or close to 6 years. Although the transition from an economic recession to an economic recovery can be choppy, once recoveries arrive, they tend to be longstanding.

Feel free to contact me or visit my website for more information.

Douglas J. Bodtcher  
Investors Group Financial Services Inc.
780-448-1988 ext. 284
Douglas.Bodtcher@investorsgroup.com